Replacement components for repairing fx pedals

I repaired a few stompboxes for a friend and thought it worth writing down and linking to some of the replacement components, to hopefully speed up other people’s repairs as it took me hours to source the correct ones!

So if you need replacement faders / slide potentiometers for an Electro Harmonix Micro Synth then you want 100k Linear (B) with 30mm of travel. Small Bear sell them here and they also sell the little white toppers. I believe these pots are also the correct size for the POG 2. I actually used these Bourns ones from Mouser as I was buying a load of components from them – they are the exact same footprint as the Alpha ones that Small Bear sell but annoyingly the shaft is slightly shorter. It looks like this:

Slightly shorter Bourns slider pots from Mouser

The first and third sliders from the left are the slightly shorter Bourns ones…

Also if you need to replace the Q switch on your Jam Pedals Delay Llama Supreme or the Gate / Osc switch on your Death by Audio Supersonic Fuzz Gun then you want a miniature SPDT ON-ON toggle switch – this one from Rapid fit perfectly for me.

Need to replace the fuse in a T-Rex Fuel Tank Chameleon? You need a 250V t315 mA slow blow 20mm fuse. T-Rex sell them here, I got them cheaper from Maplin here. You need a 2mm or 5/64″ hex / allen key to open those up.

The DC sockets on Voodoo Labs power supplies are prone to breaking. I replaced some on a Pedal Power 2 Plus using 2.1mm right angled 2A sockets from RS Components and they fit perfectly.

The correct DC connector for Korg MS20-m and Volcas (and I believe most Korg products, as it’s a Japanese standard) is EIAJ type 3, centre positive.

That’s all for now but I’ll update this page as and when I do more repairs and find out anything useful worth sharing.